[alirizak]

Yes, someone posted them a few comments back 2022/2023 map updates. Just scroll through a few comments. There might be more up to date but close to new!

No, there is no Turkiye's map inside

 

[Paul-R]

This is the latest download for Turkey that I am aware of.

http://psa.download.navigation.com/automotive/PSA/RT6-SMEGx/M49RG20-Q0220-1471.ZIP

421MB
CID:024,117,0,2,2020,"14/6/2020","TURKEY","HERE"

Thanks to orte on GPS Power for the link.

 

[Drifter_ste]

Hi probably wrong place to be posted but I have a 2013 peugeot 508 and looking for a map update will this work for me too?

 

[nordic508sw]

I own a Peugeot 308 1.6 BlueHDi (T9) with software version SMEG5.43.A.R2. dated 19-09-17
1)Any new firmware updates available?
2) does it have a gps installed, thats factory deactivated?
would it be possible to load satnav maps on to my car despite it not showing a navigation symbol on the bottom left side of the display?

 

[Paul-R]

Hi probably wrong place to be posted but I have a 2013 peugeot 508 and looking for a map update will this work for me too?

If you have a head unit with satnav manufactured by Magneti Marelli (RT6, SMEG, SMEG+ or SMEG+ IV2) then yes.

 

[Paul-R]

I own a Peugeot 308 1.6 BlueHDi (T9) with software version SMEG5.43.A.R2. dated 19-09-17
1)Any new firmware updates available?

That's the latest available.

2) does it have a gps installed, thats factory deactivated?
Would it be possible to load satnav maps on to my car despite it not showing a navigation symbol on the bottom left side of the display?

If your car doesn't have satnav installed already then it's impractical to retrofit it.

 

[Antonio Pereira]

boa noite sou novo aqui e estou insatisfeito com o gps do 308 sw 2015 queria atualizá-lo e não consigo uma atualização mas recente já que o meu 308 e importado alguém me pode ajudar fico agradecido

 

[Paul-R]

Please post in English. Use Google Translate or any other translation tool.

Good evening I'm new here and I'm dissatisfied with the gps of the 308 sw 2015 I wanted to update it and I can't get a more recent update since my 308 is imported can someone help me I'm grateful

Where is it imported from? If it has European maps then I can't think of a problem (apart from the well known lack of space for all updates. If it's from somewhere else (Turkey? South America?) then I'm not sure but, unless it's from like Japan, I think it's still possible.

Instructions and links are on the first page of this thread but these are the links you need,

Dropbox

www.dropbox.com

https://psa.download.navigation.com/automotive/PSA/RT6-SMEGx/M49RG20-Q0421-2001.ZIP

SMEG+ Map and Speed Camera Update Procedure

 

[The_Carlos04]

Any working links for the latest map update please?

 

[Paul-R]

Errrrm, see my post immediately above yours?

 

[Dilbert322]

Errrrm, see my post immediately above yours?

Maybe its because we get the following messages:

Access to psa.download.navigation.com was denied
You don't have authorisation to view this page.

 

[Paul-R]

That's new!

Playing around I think I've found a workaround.

If you highlight the URL and then press the Enter button on the keyboard then you still get the error message but the ZIP starts to download. It was going to take 25 minutes so I cancelled the download but it appears to be the correct file by its size.

Note that clicking on the Reload button on the screen or pressing F5 do NOT prompt the download.

You can also right click on link and choose "open link in a new private window". It will start downloading...

Hope that helps.

 

[njezni]

That's new!

Playing around I think I've found a workaround. If you highlight the URL and then press the Enter button on the keyboard then you still get the error message but the ZIP starts to download. It was going to take 25 minutes so I cancelled the download but it appears to be the correct file by its size.

Note that clicking on the Reload button on the screen or pressing F5 do NOT prompt the download. Hope that helps.

You can also right click on link and choose "open link in a new private window". It will start downloading...

P.S. any latest speed camera files?

 

[Paul-R]

Thanks for that. I've added your find into my post above.

I have only used the official speed camera file but I think I've read that PSA have now ceased to supply these so maybe I'll look at the SCDB alternative.

 

[Hazzatori]

I wonder if anyone can help.. So I D/L latest firmware and installed on my SMEG+ the firmware appears to follow the corretc procedure and install etc.. but the issue I have is once everthign is complete and it does Phase 6 (ZA Files) it reboots and if i leave in the USB drive it starts the whole intalling (validating files) process again or if I remove the USB stick at reboot it just hangs on the Lion image.. I cannt get back to my normal screen and obvs ive no control over anything... anyone have any advice?

Also if this is a bricked like issue, If i buy another SMEG unit will it need pairing to my VIN or anythign like that? or is it a straight swap?

Thanks in advance, anxiously awaiting a reply lol..

Oh should add, I have attempted a hard resest with the battery and window open etc.. and I have tried to use a previous verision but I get the MEDIA.INF error if I do that.

 

[FuiCoi]

This is the latest download for Turkey that I am aware of.

http://psa.download.navigation.com/automotive/PSA/RT6-SMEGx/M49RG20-Q0220-1471.ZIP

421MB
CID:024,117,0,2,2020,"14/6/2020","TURKEY","HERE"

Thanks to orte on GPS Power for the link.

Thank's a lot, very good forum.
I have successfully updated the map and the FW from SMEG5.2.C.R1 dated 08-01-15 in to SMEG_5.43.A.R2.
Some USB stick's didn't work, than tried with another one.
My car is Peugeot 508, 1.6 Blue-HDi EAT6, Production 2015.

 

[Hazzatori]

I wonder if anyone can help.. So I D/L latest firmware and installed on my SMEG+ the firmware appears to follow the corretc procedure and install etc.. but the issue I have is once everthign is complete and it does Phase 6 (ZA Files) it reboots and if i leave in the USB drive it starts the whole intalling (validating files) process again or if I remove the USB stick at reboot it just hangs on the Lion image.. I cannt get back to my normal screen and obvs ive no control over anything... anyone have any advice?

Also if this is a bricked like issue, If i buy another SMEG unit will it need pairing to my VIN or anythign like that? or is it a straight swap?

Thanks in advance, anxiously awaiting a reply lol..

Oh should add, I have attempted a hard resest with the battery and window open etc.. and I have tried to use a previous verision but I get the MEDIA.INF error if I do that.

Just to follow up on this.. I had to send it off for repair while I hadnt bricked it it took specialist tools to get it to boot again.. £220 for the privlidge

 

[Pawel]

Hi. I have a 308 SW 2.0HDI from 2018 running 21.08.25.12_NAC-r0. Maps 24.0.0-r0. No zones loaded. Are there any newer versions and where can I download them?

 

[Paul-R]

That is the NAC system. You may get a better response by posting a new thread as this one is for the earlier SMEG+ system.

I know very little about the NAC system so can't really help on this.

 

[Torpalasse]

I can´t get the link to work neither. The advises does not help?