[pgmbmc]

Most likely you would have to take of front wheels and go from the front wheel arch behind the fog and drl lights.
When I replaced my fog lights with yellow led thats what i did but it was a tight fit, maybe you might have to take front bumper off or maybe not if there is room.

Or lift the car up and take of undertray of engine and go from the bottom?

Hi thanks for your reply, managed to find a related You Tube video and worked great the only difference on my model car all bolts no screws on the inside of the panel 1 facing and 2 vertical as video we unscrewed all top and bottom screws on bumper and managed to pop off side needed with enough access to replace bulb without undoing opposite side but make sure you support bumper so it can't drop. It can't be replaced via the wheel arch on model shown on pic, link to YouTube video below.