Peugeot Forums banner

Fault codes

8.4K views 7 replies 4 participants last post by  Gibbo  
#1 Ā·
I have a list of codes but I'm not sure if I should get them fixed or not, could be pricey!!! Have been driving at least a year in slow/limp mode and can't rev over 2.5k in any gear. I have been overtaken by a caravan once šŸ˜†

Please see below for codes:


Car Scanner ELM OBD2
DTC report
Selected brand: Peugeot

============1==============
P1435
Raw code: 1435
ECU: 10
Status: Pending fault present, Validated fault present at time of request
OBDII: A/C Refrigerant Temperature Circuit Range/Performance
Peugeot: A/C Refrigerant temperature circuit Range/Performance. EDC15C2 - Additive adding system. Faults additive accuracy. EDC15C2 - Additive system. Fuel gauge fault. EDC15C2 - Additive system. Low additive level sensor fault. EDC15C2 - Additive system. Fuel filler cap present sensor fault. EDC15C2 - Additive system. Faults additive pump. EDC16C3 - Additive system. Value received by the CAN network incorrect.
============2==============
P2002
Raw code: 2002
ECU: 10
Status: Pending fault present
OBDII: Particulate trap, bank 1 - efficiency below threshold
============3==============
P0401
Raw code: 0401
ECU: 10
Status: Test has not been completed
OBDII: Exhaust gas recirculation (EGR) system - insufficient flow detected
============4==============
P0380
Raw code: 0380
ECU: 10
Status: Pending fault present
OBDII: Glow plugs, circuit A - malfunction
============5==============
P1446
Raw code: 1446
ECU: 10
Status: Pending fault present
OBDII: Evaporative Vac Solenoid Circuit Malfunction
Peugeot: Evaporative vac solenoid circuit malfunction EDC15C2-(607) Additive level. EDC15C2-(307/406) Additive quantity. Additive minimum level wait.
============6==============
P1442
Raw code: 1442
ECU: 10
Status: Test is inhibited by other DTC
OBDII: Evaporative Emission Control System Leak Detected
Peugeot: Evaporative emission control system Leak detected EDC15C2-Quantity of additive Additive ECU.
============7==============
P1457
Raw code: 1457
ECU: 10
Status: Pending
OBDII: Unable To Pull Vacuum In Tank
Peugeot: Unable to pull vacuum in tank
============8==============
P1352
Raw code: 1352
ECU: 10
Status: Pending
OBDII: Ignition Coil A Primary Circuit Malfunction
Peugeot: Ignition coil A Primary circuit Malfunction / SID 801- Pre/Post heating relay circuit - Relay & Pre-Heat plugs not controlled
============9==============
P1446
Raw code: 1446
ECU: 10
Status: Pending
OBDII: Evaporative Vac Solenoid Circuit Malfunction
Peugeot: Evaporative vac solenoid circuit malfunction EDC15C2-(607) Additive level. EDC15C2-(307/406) Additive quantity. Additive minimum level wait.
============10==============
P1442
Raw code: 1442
ECU: 10
Status: Confirmed
OBDII: Evaporative Emission Control System Leak Detected
Peugeot: Evaporative emission control system Leak detected EDC15C2-Quantity of additive Additive ECU.
============11==============
P2408
Raw code: 2408
ECU: 10
Status: Confirmed
OBDII: Fuel filler cap warning sensor/switch - circuit malfunction
============12==============
P1457
Raw code: 1457
ECU: 10
Status: Confirmed
OBDII: Unable To Pull Vacuum In Tank
Peugeot: Unable to pull vacuum in tank
============13==============
P0401
Raw code: 0401
ECU: 10
Status: Confirmed
OBDII: Exhaust gas recirculation (EGR) system - insufficient flow detected
============14==============
P1352
Raw code: 1352
ECU: 10
Status: Confirmed
OBDII: Ignition Coil A Primary Circuit Malfunction
Peugeot: Ignition coil A Primary circuit Malfunction / SID 801- Pre/Post heating relay circuit - Relay & Pre-Heat plugs not controlled
============15==============
P1446
Raw code: 1446
ECU: 10
Status: Confirmed
OBDII: Evaporative Vac Solenoid Circuit Malfunction
Peugeot: Evaporative vac solenoid circuit malfunction EDC15C2-(607) Additive level. EDC15C2-(307/406) Additive quantity. Additive minimum level wait.
============16==============
P1435
Raw code: 1435
ECU: 10
Status: Confirmed
OBDII: A/C Refrigerant Temperature Circuit Range/Performance
Peugeot: A/C Refrigerant temperature circuit Range/Performance. EDC15C2 - Additive adding system. Faults additive accuracy. EDC15C2 - Additive system. Fuel gauge fault. EDC15C2 - Additive system. Low additive level sensor fault. EDC15C2 - Additive system. Fuel filler cap present sensor fault. EDC15C2 - Additive system. Faults additive pump. EDC16C3 - Additive system. Value received by the CAN network incorrect.
 
#2 Ā·
First thing you need to do is get a decent Planet diagnostic.


But from the looks of things it seems your DPF system isn't working properly and the filter and many other engine components such as the EGR valve will be blocked with soot.

All the codes are common and well documented on here.

I don't understand why you've been driving around for a year with this problem, you've only further damaged the car.
 
#6 Ā·
How much will it cost is likeasking how long is a piece of string. Fault codes need to be read as Gibbo said with a specific Peugeot reader as a starting point so that you can then work out what to inspect. You mention money as the reason you left it this long but unfortunately I believe that that will probably mean even more damage has been done so will cost a lot more than an earlier intervention would.
 
#7 Ā·
Based on the codes you have the following issues

Additive level is low or run out
Fuel tank cap sensor is fault
EGR valve is faulty, there is a vac leak or its blanked off
Possible issues with glow plugs but sometimes this is a fake fault

All of the above are stopping the correct regen of the dpf which is now possibly blocked.

You need to fix all of the faults or cheapest option is to delete the dpf if legal to do so


Sent from my SM-T830 using Tapatalk