Peugeot Forums banner
21 - 40 of 80 Posts
I got mine from Aliexpress - multiple sellers came up, I think mine was Baificar or similar. I've read someone who sourced from ebay but dunno how that went. It might be worth seeing price on Aliexpress etc and then haggling with dealer as this is a widespread problem. Yours is the first one though with a different part number!! Have you had any diagnostics done?
Yes just checked missed th 96 off so same part number as yours
 
Is this the right one put in the part number

This is the picture he sent me this look ok to you
It's really confusing on aliexpress isn't it. Searching on your part number (9675349880) also brings up pictures of the part I needed (9675350380) which is what he's sent you. Mine was/is also sticked JL06 whereas yours is JL01. I don't know if the part is the same but you seem to need the one ending 880. Have you googled it for results from UK sites to see if the part looks the same?
 
It's really confusing on aliexpress isn't it. Searching on your part number (9675349880) also brings up pictures of the part I needed (9675350380) which is what he's sent you. Mine was/is also sticked JL06 whereas yours is JL01. I don't know if the part is the same but you seem to need the one ending 880. Have you googled it for results from UK sites to see if the part looks the same?
Il have a browse on Google tonight thanks so much it is very confusing lol 😆😆😆😂
 
There should be a battery status monitor on the battery negative terminal. This should have a power connection to the BPGA. One of your fault codes suggests this connection is not made properly. The BSI fault also suggests something is disconnected.

I see that your replacement BPGA has a different fuse set this suggests it came from a different model. I take it they are the same part numbers and you have fitted the correct fuses for your car.
 
There should be a battery status monitor on the battery negative terminal. This should have a power connection to the BPGA. One of your fault codes suggests this connection is not made properly. The BSI fault also suggests something is disconnected.

I see that your replacement BPGA has a different fuse set this suggests it came from a different model. I take it they are the same part numbers and you have fitted the correct fuses for your car.
Thanks a lot yes I told him vin number he said it would be fine for my car had to swap a few fuses but thanks for your help appreciated 👍
 
There should be a battery status monitor on the battery negative terminal. This should have a power connection to the BPGA. One of your fault codes suggests this connection is not made properly. The BSI fault also suggests something is disconnected.

I see that your replacement BPGA has a different fuse set this suggests it came from a different model. I take it they are the same part numbers and you have fitted the correct fuses for your car.
Also was told this from him after I sent pics

Installation method of Peugeot power manager: before loading, unplug the positive wire, do not start the car after loading, lock the car with the remote control, and start the car after 5 to 10 minutes.
 
Also was told this from him after I sent pics

Installation method of Peugeot power manager: before loading, unplug the positive wire, do not start the car after loading, lock the car with the remote control, and start the car after 5 to 10 minutes.
That is fairly typical advice after changing something. I haven't got access to the wiring diagrams for your car. They are behind a paywall. I have attached a block diagram for an earlier 3008. This shows a link from the BPGA to the battery status monitor (1031). The battery status monitor also has a LIN bus connection to the BSI. I get the impression that the power connection for the BPGA to the Battery status monitor is disconnected.

Image
 
Here is part of a wiring diagram from another Peugeot. You can see there is 6 pin plug on the BPGA (1014). The connection to the battery status monitor (1031) is made at that plug. I can see in your photo that your BPGA has a multiway brown plug is that connected properly? Some BPGA have some extra fuses on a small plug it would be worth looking for that.


Image
 
I have ringed a small fuse in your photo of the BPGA. Did you transfer that fuse View attachment 111448
Fantastic thanks put in Fuse and bingo all working no faults thank you so much for you time and help Ian appreciate it all have a fantastic new year mate i.o.u a few beers thanks again ;)🍻🍻🍻
 
21 - 40 of 80 Posts