Hi, so a year back my AC started to not work. It fails to blow cold air, as I live in Norway this is only a problem during hot summers. As there are few hot summers, this only became an issue now.
As I’ve been trouble shooting other issues , i tried to also looking at the AC.
I put it on full fan and turned it down to low, with the door open. It is 19 degrees celcius outside, and i fail to hear the relay click as i seem to remember it did.
when i look under the bonnet , i see the aux.belt running. However it does not seem like the compressor is running/clicked in. Is there some sort of solenoid clutching the compressor in/out pending temperature?
furthermore, i had a PP run earlier due to a P0335 error. This did Not give any errors on AC or temp sensors etc.
Can this be fuse,relay issue? Temperature sensor or connector?
Or will theese show as errors in the PP?
or is it simply a faulty compressor, or missing coolant?
As I’ve been trouble shooting other issues , i tried to also looking at the AC.
I put it on full fan and turned it down to low, with the door open. It is 19 degrees celcius outside, and i fail to hear the relay click as i seem to remember it did.
when i look under the bonnet , i see the aux.belt running. However it does not seem like the compressor is running/clicked in. Is there some sort of solenoid clutching the compressor in/out pending temperature?
furthermore, i had a PP run earlier due to a P0335 error. This did Not give any errors on AC or temp sensors etc.
Can this be fuse,relay issue? Temperature sensor or connector?
Or will theese show as errors in the PP?
or is it simply a faulty compressor, or missing coolant?
