What diagnosis software are you using check cap sensor values if you are using planet

Sent from my SM-T830 using Tapatalk

 

Hiya just a question are you trained peugeot/citroen trained technicians.
Also will that definitely work as I did try a launch machine and that didn't do it.
Would this do the job
Lexia 3 PP2000 for Citroen/Peugeot Diagnostic with Diagbox V7.83 Y8A1

 

Hiya in using mac tools new red rt8 diagnostic machine

 

There's your problem, it needs to be done with Planet or Diagbox.

 

Hiya just a question are you trained peugeot/citroen trained technicians.
Also will that definitely work as I did try a launch machine and that didn't do it.
Would this do the job
Lexia 3 PP2000 for Citroen/Peugeot Diagnostic with Diagbox V7.83 Y8A1

 

Hiya just a question are you trained peugeot/citroen trained technicians.
Also will that definitely work as I did try a launch machine and that didn't do it.
Would this do the job
Lexia 3 PP2000 for Citroen/Peugeot Diagnostic with Diagbox V7.83 Y8A1

 

That should work you could also look on the planet map on the forum and see if there is a member near you who could do a code read and save buying the kit

Sent from my SM-G965F using Tapatalk

 

I've used the diagbox today its showing as permanent fault still. Unable to clear faults, unable to tell it has been filled as it comes up unable to perform learning, any ideas which way to go on this as need to get to the bottom of this asap as it throws up on the dash risk of dpf clogging. Any help and ideas greatly appreciated

 

If you've got Diagbox, do the components test. I'd guess that there's a wiring issue.

 

Should they have a permant live feed going to the additive tank