The windows already remotely close from the factory.

On the second press of the remote locking button - keep the button pressed & any open windows will shut.

You have to keep the button pressed until the windows shut - if you release the button the windows stop closing.

If you have keyless entry - the window closing function also works from the boot lock button / front door handles.

Keep boot button pressed / keep hand on the touch lock sensor on the handle.

As for opening the windows - IIRC its locked out in the BSI configuration set up & requires Diagbox to activate the function.

 

Yes, I know about closing open winndows.
I would like to open them remotely when approaching the car. In summer time it gets really hot inside (dark colour + panoramic roof). Holding unlock button doesn't work. Of-course, this option could already be available, but I am not familiar with it.

 

IIRC the option to remotely open the windows on the 308 T9 is locked out in the BSI configuration set up.

You need someone with Peugeot Diagbox to first activate this function on your car - then you will be able to open the windows via the remote keyfob.

 

Ok, thanks. And I assume, this cant be performed at official Peugeot dealer?

 

It can - depends if the dealer will do it.

 

I thought so...

 

Hi tinnov, did you manage to activate de windows opening from remote key? Thanks,

 

Hello all,

Today I managed to change the "Presence of the remote control ventilation function" from "No" to "Yes", using Diagbox 7.57. It didn't work from the first try, I don't know why. But I did a write without any change for the beginning, that worked, then I made the change and I wrote again, and that's how it worked. Now, all four windows open the second time I press the open button on the remote control.

What I found further, is that now the car closes automatically after 30 seconds, the mirrors fold and the doors lock, but if the windows are lowered they do not rise, they remain lowered. I like the new option, especially now in the summer.

So, it can be activated from the following menu: BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration->Protection-Access-Mechanical Assistance. Here the parameter "Presence of the remote control ventilation function" has to be changed from "No" to "Yes". I have to mention the equipment level of my car is Active.

 

Hello Sadang,
I have 308 T9 active 2015 and I want program my key fob to open car’s windows.
I have used Diagbox 7.57 and I connected normally.
But in menu: BSI->Repair->Configuration->Configuration with displaying of the parameters->Manual Configuration->Vehicle Configuration->Protection-Access-Mechanical Assistance, there isn’t the parameter: “Presence of the remote control ventilation function”
Where else can I find it?

 

Hey thanks for advising how to do this, I just tried there and each time I go into Protection-Access-Mechanical Assistance a pop appears saying application now deactivaed and wont allow me to go any further.

Running version 7.83

Any ideas?

Cheers

 

Try with 7.57. For me it worked great.

 

Perfect, done a fresh install of 7.57 and it worked a treat. thanks again

 

Yes, When I press close button, windows are closing. But not opening with open button.
Here is my 308 screenshot from diagbox
Maybe yours cars have velum and for this reason has this menu
If I use diagbox version after 9?

 

Yes indeed, my car has vellum. Is the model 308 SW. Using a new diagbox version will not make any change in the functions available on the car. They must be physically present on the car in order to be activated or deactivated. These functions are written in the car's computer, Diagbox only displays what the computer tells.

 

I know this was four years ago, but my 2024 Rifter GT can both open and close windows remotely from the key fob.

Great, or is it.

I keep my keys in my pocket with other keys on the ring. One of my neighbour's came to my door to tell me all my windows were open. So at some point the open button was pressed for, what 4 seconds, as the windows were only half open, then hit the lock button as the doors were locked.

This is not a great feature...... for me.

Does anyone know of a way to disable this for the opening element?

I've taken the key off the ring and keep it in my other pocket, not good.