my version is 21.14 thanks

 

Go into new parts ,

replacement injectors,

then take the first 8 numbers/letters of the top of the injector on the outside and enter them .

number one injector is closest to the battery ,

then configure ,

job done:thumb:

 

I thank very much for your response friend
Well today I was trying to solve the problem and is as follows

I began by introducing the numbers right:

ImageShack® - Online Photo and Video Hosting

then appeared in successfully:

ImageShack® - Online Photo and Video Hosting

=))

I thought I had already solved the problem

do a comprehensive test

and appears to me an error telecoficaçao

gives the information that is:

Error 1613
ImageShack® - Online Photo and Video Hosting

the car remains the same with the same error is not from 3mil rpm and gives error diesel additive minimum level of

thank you for your support

 

the problem is here?
http://img713.imageshack.us/i/errorbab.jpg/

how do I configure this?

 

My problem is i can`t understand its not in English

 

when I turn my car appears in the error panel

minimum level of additive dieasel

this because I used the SMPP to reprogram my control unit but not as I waited for the right time, and started the car the injectors deprogram

PP2000 then as I am I'm trying to solve the problem

the car does not pass the 3000 rpm and appears minimal level of additive dieasel

 

Have you a FAP filter in this car?

 

no the fap is removed

 

that gives me the error is p 1613

telecodificacao be?

 

i think the probleme is here
http://img713.imageshack.us/i/errorbab.jpg/

how do I configure this?

carry on f5 but gives error

 

i need a help =(

 

P1613 Configuration

I`m sorry you need to translate , i don`t understand ,

i know you need to configure something , but is it BSI ? Engine ECU?

Need more info

What happened car?

History of car?

Why do you need to recode injectors?

 

I'll try to explain

I read the centerline of the car and told me to update the file.

when I got the file copied to the control unit with reprogramdor mpps.

when I turned the car appeared anomaly and anti pollution additive minimum level of disel ..

what they told me was that I had to deprogram car ecu

now I need to reprogram the ECU of my car

 

Why are you messing about with your car like this , i`m sorry i can`t help you , you either need to bring it to Peugeot for a software download or to who ever remapped/dpf off your car for original file and start again.:nono:

 

I cannot program it with the PP2000?

 

the file that is updated and I have to fap off

the problem is not in the file

but in that it ECU deprogrammed

 

If you cannot configure the ECU then you need a new ECU or a clone ECU

 

Hello friend
my ECU is good but this deprogrammed how do I program it?
the problem is i got the ECU deprogrammed


is the error that appears in the calculator engine

1613

is there any tutorial to help reprogram the ECU to 1.6 hdi?

is there any way to connect to servers psa?

 

i need a help friends

 

how to solve the error 1613? configuration error calculator

 

is possible to change the name of the topic? or is it better to close and open another?

 

I think your problem is going to be solved only by a Peugeot download ,this can happen in only one way , by Peugeot Dealer .

I have coded injectors even though the engine ecu could not be configured and the car will run but in limp mode because the car see`s a configuration problem ,if you can`t code your injectors then you have a major problem that will not be solved on this forum i am very sorry to say.

 

the injectors are already configured
Now set the ecu fault because I do not know how to configure.

how do I set the parameters of the ECU?
I have to go to new parts?

 

Engine ECU

Configure

change components like long gearbox , controlled by chopper and so on ,

then reconfigure ,

thats it.

 

for example
I turn on the program:

I go to peugeot planet 2000

and then?

new parts?

 

pp2000 then

replacement parts

then engine ecu

then configure

this opens engine ecu

change details

then reconfigure

 

thanks you