Do you know how to bleed it?

 

the HDI bleeds its self through the computer not like the older diesels where they have a manual hand pump in the system,

just ensure you have a strong battery as it might take a few turns to start it.

 

If the engine has a primer then you will need to pump that whilst cranking. If it doesnt have a primer then you will have to turn the ignition on for 10 seconds, then off do this about 3 times and that will have bled it through.

 

Hi Thanks for the replies,it,s a 54 reg so it might be a self primer??? doing this weekend ,will see how it goes,got me bus pass as back up

Mick

 

I have a Bosch F 5216, 0 450 905 216, fuel filter that I purchased before selling my car. Make offer.

 

Yes, it'll self prime on a 54 plate. All dW10's right back to the ark self prime, unlike the DV6.

Cleanliness is the word of the day when changing the filter - grit as small as 2 microns will wreck an injector, and even the best eyesight won't spot that.