[AdalQureshi]

Hi Elmo3008 and others, I have had the p1435 issue for sum time now and the RED STOP light come on with yellow engine fault light for my Peugeot 3008 2.0 2014 hybrid.

This stops my front 2 wheels from moving and only my rear wheels work with electric and diesal powered.

If i turn off the engine, wait 25 seconds for the red light to come off, turn it on and press the manual gear pad to make the engine turn on, then only the yellow engine light comes on and i can drive using the front wheels and rear if necessary.

However my cars performance is less then what it was prior to this issue. I can barely get past 50 mph and its a 2.0 litre. Had the turbo checked, no issues.

Is there a way to trick the ecu from being told a new elos tank has been fitted without actually doin it? And can it be done by an individual or does it need expert mechanic software? I have a obdII but not options i cud find for the new elos tank.

Any help is greatly appreciated.

 

[AdalQureshi]

Hi Elmo3008 and others, I have had the p1435 issue for sum time now and the RED STOP light come on with yellow engine fault light for my Peugeot 3008 2.0 2014 hybrid.

This stops my front 2 wheels from moving and only my rear wheels work with electric and diesal powered.

If i turn off the engine, wait 25 seconds for the red light to come off, turn it on and press the manual gear pad to make the engine turn on, then only the yellow engine light comes on and i can drive using the front wheels and rear if necessary.

However my cars performance is less then what it was prior to this issue. I can barely get past 50 mph and its a 2.0 litre. Had the turbo checked, no issues.

Is there a way to trick the ecu from being told a new elos tank has been fitted without actually doin it? And can it be done by an individual or does it need expert mechanic software? I have a obdII but not options i cud find for the new elos tank.

Any help is greatly appreciated.

 

[AdalQureshi]

Replace the tank and the codes will probably fade over time.