Low boost problems, 208, 1.4hdi

Confusedas@@@ · Mar 15, 2020

Hi,

Hopefully someone can give me a few pointers as I'm slightly stuck!

I have a Peugeot 208, 1.4hdi 13 plate

It is going into limp home mode as soon as I reach about 2800rpm. It was originally coming up with a low boost fault so I have removed the egr valve but this wasn't that clogged so this wasn't the issue. Now when the fault comes up it is giving me the code of p2562, p0299, p11ab. Any help or suggestions would be greatly appreciated

Thanks

amiejane · Mar 15, 2020

Fault code	P2562
After sales description of the fault code	Turbocharger: Position incorrect relative to requirement, not enough turbo
Description of the diagnostics	The position measured is greater than the reference by more than 20% for 4 seconds
Conditions of activation of the diagnostics	The following conditions have to be met engine running Engine speed between 1500 and 4000 rpm
Conditions of disappearance of the fault	Driving for 5 minutes
Down-grade modes if fault present	-
Switching on of the warning lamp and/or warning message	Warning lamp MIL
Main customer complaints likely	Noise Smoke from the exhaust Lack of power Loss of braking
Suspect areas	Turbocharger Turbocharger fixed geometry control electrovalve Turbocharger fixed geometry position repeat sensor EGR exchanger with bypass EGR exchanger bypass control solenoid valve vacuum pump Electrical harnesses

Low boost problems, 208, 1.4hdi

Our Vendors

Top Contributors this Month

Recommended Communities