[cowpoke1]

Thanks for the video, I hadn’t come across that one.

Mine is a bit different though, I’ve got the 9HR engine with 6 speed manual. I finally removed the battery tray and found the filler location.

It’s a round plastic cap that simply sits on the breather hole. It doesn’t fall off because the gear shift linkage sits only a few mm above it. I had to loosen 2 and remove one of the bolts holding the linkage adjuster cables to the gearbox in order to pry the cable up enough to get the cap out from underneath.

Hope this might help someone in the future

 

[cowpoke1]

It did thank you very much