Peugeot Forums banner
1 - 11 of 11 Posts

Nelix

· Registered
Joined
·
301 Posts
Discussion starter · #1 ·
Hi All

Will the title says it all.

Are the injectors from the 90BHP and the 110BHP engines the same.

I have a 407 SW 1.6 HDi 110bhp and have the chance of a set of injectors for cheap from a 307 Estate, the seller however does not know if they are from a 90 or 110 version.

Cheers

Nelix
 
They would work but they are not the same also there are different types fitted not all are bosch and you can only fit the correct type as wiring is different between bosch and siemens delphi etc
 
Discussion starter · #3 · (Edited)
They would work but they are not the same also there are different types fitted not all are bosch and you can only fit the correct type as wiring is different between bosch and siemens delphi etc
I have the numbers off one of the injectors:

F5CU-ABB07-606680

0445LLO 239 (my current ones have 259 on the end)

Would I see any performance difference by fitting these?
 
Discussion starter · #4 ·
Just been given the engine code that these injectors came out of, 9HX which is the 90 bhp version. I take it that means I can't use them!!
 
Discussion starter · #6 ·
2 of mine are fine. the engine wont start with the other 2 in, replaced these with 2 known good ones from a friends car and it starts no problem.

Would I be able to put the old nozzles on the 90bhp injectors or is there more to it than that?
 
Discussion starter · #8 · (Edited)
ÂŁ80 for the set, apparently they were tested and working fine before they were removed. That's as much as I know.

Is there an easy way to identify the make i.e. Bosch, Dephi etc
 
1 - 11 of 11 Posts