Peugeot Forums banner

Bulbs changing woes. 5dr Petrol SE 04 plate.

1.1K views 2 replies 2 participants last post by  ColinM  
#1 ·
Hi all,

Car did not start for at least 5 turns of the key until some WD40 applied this evening but that's for another topic.

To boot the drivers side main beam bulb has blown (plus the I managed to remove the whole securing hinge and now it won't go back) and the passenger side lights have both gone. I'm probably going to have to nip to the dealer in the morning (never had to do that for a bulb change in my life).

The passenger sides are unreachable but it says in the manual

"remove the style cover,fixed with two plastic screws to access the bulbs"

Now it's very dark out there and cold tonight. Has anyone done this ? I couldn't see any plastic screws at all.

Cheers

Colin.
 
#3 ·
Thanks Gibbo. I thought the hand book was a little vague. I've just got back from my local Peugeot dealer and a really knowledgeable chap from the service department sorted it out. My shaving mirror will come in handy for bulb changes it seems. Side lights just pulled out which I didn't realise. I've only had the car a few months coming from a 306 and the bulbs on that were really easy to change.

Cheers

CM.