Hi to everyone. I'm having a problem with my top right engine mount. The engine is shaking up and down when idling and resonates inside the cabin while driving. I can see that the rubber has been compressed because there is too much space between aluminum bracket and mounting cover. Oe number for my car is 1807gf, but all mounts I could track by that number are solid rubber, while my is hydraulic. Only one I could trace by numbers inscripted on the mount itself is Lemförder mount with number 3456701. It is hydraulic mount but without aluminium bracket. Problem is Lemförder states it fits 307 2.0 hdi only. But, is there a diference between 2.0 hdi and 1.6 hdi engine mounts beside aluminum bracket? Can I use this one if fitted my original aluminum bracket or should I go for 1807gf one, even if solid rubber? Can someone, please, solve my dilema. Thanks in advance
Mixa.ar
Engine Support Right DS4 307 5008 1.6HDI 1807GF Citroen Peugeot - Buy now! (eurofrance24.com)
1807GF - Engine mounting, holder OE number by CITROËN, DS, PEUGEOT | Spareto
1807GF - Engine Mounting Right (eurocarcare.net)
1807.GF - HYDRAULIC ENGINE MOUNT : Partolium
3456701 LEMFÖRDER - Engine Mounting (fixparts-online.com) does it match what you have ?
Try Here to see if the part numbers are correct.
1807GF - Engine mounting, holder OE number by CITROËN, DS, PEUGEOT | Spareto
1807GF - Engine Mounting Right (eurocarcare.net)
1807.GF - HYDRAULIC ENGINE MOUNT : Partolium
3456701 LEMFÖRDER - Engine Mounting (fixparts-online.com) does it match what you have ?
Try Here to see if the part numbers are correct.
Thank you. My mount is the first one you listed. But, aftermarket ones are made either solid rubber or fluid filled, depending on the brand. Oem one is fluid filled, but very expensive in my country. Febi, corteco and topran, which I can source in my country are all solid rubber. Sasic and Hutchinson are fluid filled but there aren't any for sale. There are some fluid filled I can source, but they are all some chinese made brands I don't trust. That is the reason I'm asking if lemforder 3456701 would fit, because it is fluid filled and of trusted brand and it looks exactly the same as 1807gf ones with only difference being it comes without aluminum connection arm. It physicaly fits 100%, numbers inscripted on it match those on my mount, but what boders me is why on lemforder's site it only states being for peugeot 307 2.0hdi? No other model listed, not even citroens with the same engine. I'm interested what is the difference between mounts for 2.0 hdi and those for 1.6 hdi except aluminum connecting arm? If it is the only difference, then lemforder 3456701 should fit because it comes without aluminum arm, you must reuse your old one no matter what engine you have.
Hydraulic would be to lessen the vibration and improve dampening effect, to be honest with you, I would stick with that. I suspect it might chew through rubber ones at a quick pace, but I might be wrong.
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
-
?
