Peugeot Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
16 Posts
Discussion Starter #1
Hello all,
I’m wondering if anybody knows of or can point me in the right direction of a wiring harness diagram/specs/colour guide that can help me identify which wire is which in the main loom, i.e. handbrake, permanent live, switched live etc. Obviously I could use a multimeter but if there is anything around that you are aware of I would be extremely grateful!

Thanks all!
 

·
Registered
Joined
·
14,887 Posts
Colours mean nothing you need to look at the tiny printed numbers on the wires !

There is SOME logic to the colours like green is nearly always earth but not always
black is more likely to be power than earth !
Yellow is normally power as is white but yellow with green is earth !
Red is live most of the time
Blue is usually switched live IE only when ignition is on
 

·
Registered
Joined
·
14,887 Posts
Yes but it would probably be easier to ask the specific question relating to what you are actually trying to achieve rather than what wire does what its a bit vauge.

Someone may already have done what you are trying to do.
 

·
Registered
Joined
·
16 Posts
Discussion Starter #7
Funny enough I got mine through today! Question is.... how best to interprete the diagrams lol
 
1 - 9 of 9 Posts
Top