Peugeot Forums banner

1 - 13 of 13 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
Hi all I want to instal an alarm to a 2012 bipper looking everywhere for wiring diagrams cant find any?

need to find turn signal wires < & >
rear door locking/open

thanks
steven
 

·
Registered
Joined
·
5 Posts
Discussion Starter #6
ok so i do not have a owners manuel for the numbers or is this for the connector plugs into fuse board?
 

·
Registered
Joined
·
695 Posts
in fact wasnt that hard to copy n paste,here you go :)

6202 : front left-hand door lock assembly
8605 : anti-theft alarm siren /
8611 : anti-theft alarm system bonnet switch
6207 : front right-hand door lock assembly
8602 : interior protection unit (anti-theft alarm)
CPC0 : left-hand sliding door contact assembly
62A1 : rear left hinged door lock assembly
CPC1 : right-hand sliding door switch assembly
6299 : door locking high frequency aerial
BCM0 : multifunction switch block
PSF1 : engine compartment fusebox panel
CA00 : ignition switch /
BSI1 : built-in systems interface
MC30 : body earth point number 30
MC10 : body earth point number 10
MC46 : body earth point number 46
M000 : engine earth

not sure what 23-- is but i do know 2300 is
2300 : Hazard Warning Signal switch
 

·
Registered
Joined
·
695 Posts
in the diagrams the number inside the boxes are the pin numbers on each plug.
outside each little box is another number this is the number of each individual wire,always printed on each wire along its length although sometimes not always easy to read,,,peugeot dont really go by colours more rely on wire numbers.

then you have other numbers such as 6V-NR ,6V is the loom number and NR is the colour of the plug in french,NR is BLACK

heres a handy website that explains everything about peugeot wiring diagrams

PEUGEOT ALL MODELS WIRING DIAGRAMS - GENERAL
 

·
Registered
Joined
·
5 Posts
Discussion Starter #11
Hi terry

May I ask what software are you using for the diagrams?
I am finding it hard to see pin locations/numbers
 

·
Registered
Joined
·
695 Posts
Hi terry

May I ask what software are you using for the diagrams?
I am finding it hard to see pin locations/numbers
the diagrams come from the program SEDRE

Theres a link in ianMLs post here which costs 9.99 but i can pm you about another way to get it
Your RPO number is 9755 (the factory code is 83=Ryton, England).

Multiplexed means the fuseboxes and most accessories are controlled/connected by a multiplexed digital highway. From your RPO, your car was built 25 July 2003, so is almost certainly multiplexed. That can be confirmed from the Service Box Documentation.

The wiring diagrams are from the SEDRE, which is best accessed from this site. Do not click the blue boxes - scroll down to the £9.99 offerings, and you get the full Service Box Documentation and SEDRE for ALL the listed models, irrespective of which you choose. Highly recommended - usual disclaimer.

You can also get access from Service Box, by registering as an independent, but the illustrated repair instructions and SEDRE are pay-to-view.
 
1 - 13 of 13 Posts
Top