[sowczan]

hello!
i need to get to the speakre's wires to connect them to my new subwoofer.
I plan to open the door panel to find out the wires for master speaker, then to find the same in the doorstep channel/sill plate.
do you know how to gently remove this trim element (sill plate), or maybe you have some other solution? The car is new, so big or risky modification wont work
thanks for help!

 

[Piren79]

hello!

i need to get to the speakre's wires to connect them to my new subwoofer.

I plan to open the door panel to find out the wires for master speaker, then to find the same in the doorstep channel/sill plate.

do you know how to gently remove this trim element (sill plate), or maybe you have some other solution? The car is new, so big or risky modification wont work

thanks for help!

Hi, did you find out what cabels too hack into? Where did you find them and what coluors did they have? I also plan to take hi level speaker line and use for a smal sub with hi level input.

/Piren


Skickat från min iPhone med Tapatalk

 

[deeturbo]

It might be easier to hack in to the harness at the back of the radio.

 

[Piren79]

It might be easier to hack in to the harness at the back of the radio.

Ok. Does anyone have a chart or something to recognice the speakercables?


Skickat från min iPad med Tapatalk

 

[deeturbo]

It should be a standard quad lock connector.

 

[sowczan]

hello!

i need to get to the speakre's wires to connect them to my new subwoofer.

I plan to open the door panel to find out the wires for master speaker, then to find the same in the doorstep channel/sill plate.

do you know how to gently remove this trim element (sill plate), or maybe you have some other solution? The car is new, so big or risky modification wont work<img src="http://www.peugeotforums.com/forums/images/smilies/smile.gif" border="0" alt="" title="Smile" class="inlineimg" />

thanks for help!

Hi, did you find out what cabels too hack into? Where did you find them and what coluors did they have? I also plan to take hi level speaker line and use for a smal sub with hi level input.

/Piren




Skickat från min iPhone med Tapatalk

Hi Piren,
Yes i did it trough Hi-output then Hi/low converter.
obviously it is much more proffessional doing the same from the connector/back side of the radio, but i couldnt find any manual how to remove it. if i had known that i would probably have done it this way. anyway i found the wires under the glove box.if you like i could check the colors. I connected it to mazda sub. this is not a big thing but all together it sound pretty well. .

 

[Piren79]

Hi Piren,
Yes i did it trough Hi-output then Hi/low converter.
obviously it is much more proffessional doing the same from the connector/back side of the radio, but i couldnt find any manual how to remove it. if i had known that i would probably have done it this way. anyway i found the wires under the glove box.if you like i could check the colors. I connected it to mazda sub. this is not a big thing but all together it sound pretty well. .

Hi.

I did som research on the smeg+ and i found this link https://fccid.io/ANATEL/00719-14-05386/MANUAL/DADF0ABD-43AA-405C-8165-C6B5BEC8D0EC/PDF and there it was. Everything i could possible want to know.

Im not going to build a monster stereo. Just going to enhance the bas a little. Im using a GAS 880A under the floor in the trunk.


Skickat från min iPhone med Tapatalk