Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter #1
Hi

My 406 drivers window is stuck up. and wont move, all the other windows are fine. Im assuming from all the posts I have read, that the motor is the issue.

Now, all of my doors have electric windows, will the rear drivers door be the same as the front? can I

A) Swap the doors/cards over
B) Take the mech from rear and stick in front. (Not worried about rear not working)

Cheers

Stu
 

·
Registered
Joined
·
6 Posts
Discussion Starter #2
OK window is fine, its the rocker switch! I could hear the other 3 clicking and this didnt! so ive popped it off and am currently using the switches underneath with my nails to open and close the window!
 

·
Registered
Joined
·
1,424 Posts
Are they the rubber contact type buttons ? I had an issue and cleaned the circuit board with some IPA (Isa Propyl Alcahol) and then blew it out with compressed air switch cleaner following a tip from the forum
 
G

·
Guest
Joined
·
0 Posts
The switch is a common weak spot on the 406, I've replaced mine with good and tested 2nd hand ones, but there are numerous fixes available with pictures on tinternet to sort out the connection....
 
1 - 4 of 4 Posts
Top