Peugeot Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
61 Posts
Discussion Starter #1
I have a 307cc and the front nearside wheel arch lining is knackered. So, I'm looking at breakers for a replacement.

Question is, is the cc any different from the other models in this regard, or will a part of any 307 of a similar age be ok?
 

·
Registered
Joined
·
42 Posts
Both our front inner arches keep popping out is there anything securing them in or are they just held in by the outer arch
 

·
Registered
Joined
·
1,843 Posts
The original clips are OK and work if used properly. The centre pin is the key. When they are inserted properly the outer shell goes in the holes and the centre pin locks them. This pin is pushed in so is flush with the main body of the outer part. To remove them just push the centre pin in a bit more and pull the whole clip out of the hole. Simples really.
 
1 - 9 of 9 Posts
Top