Peugeot Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
37 Posts
Discussion Starter · #1 ·
Automotive tire Bumper Gas Tints and shades Personal protective equipment



1.6 petrol turbo 2010 . any body know how to adjust the wastegate ?
the waste gate rod only pulls in with vacuum , from what i know there is supposed to be slight pressure on the waste gate flap ? to keep it closed.?
but if i go to adjust the waste gate closed , i run out of thread on the arm. the slide with the threaded rod goin thru it is at very end of adjustment , and there is still more to go. if i bring the arm CLOSER to the acutator it brings it open, any one help ?
 

·
Moderator
Joined
·
9,199 Posts
Most turbo's the vacuum holds the wastegate shut not open which is why you cannot adjust it closed. It's a part fail safe in that a vacuum or similar failure it will result in no boost not over-boost
 
1 - 3 of 3 Posts
Top