Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,045 Posts
Discussion Starter #1
heres a quick guide on how to use 10k boost this will help clean carbon that has build up on your intake will work all Diesel engines.

what is needed:

10k Boost or Wynnes EGR3 Clean
Flat head screw driver
someone to help keep the revs up on the car



Step 1: Make sure your car is up to normal running temp before you start this.



Step 2: Take your scew driver to remove your air intake hose clamp and pull it up like this picture

Step 3: Give the can a good shake and tell the helper to rev the car to 2k and then start to spray the 10k boost into the intake for around 1min then get the helper to let the car return to idle let the car stay like this for 5mins
repeat this untill the can is empty.

Step 4: Fix the intake hose back to the intake and screw up the clamp and take the car for a 10min drive.

Step 5: Enjoy a cleaner intake and smoother running car :thumb:

A Video will be uploaded soon to show you what comes out the exhaust!
 

·
Registered
Joined
·
1,045 Posts
Discussion Starter #4
that was just after the 1st run when you do the 2nd and 3rd it gets really smokey! i have notcied the car runs much smoother and power feels better, i do this every 6/8 months just so the car insides are clean :thumb:
 
1 - 8 of 8 Posts
Top