Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
H all am please looking for some help

I have a pug 307 2002 1.4 hdi. I have changed the turbo about 3 months ago
Where the oil feed pipe goes into the top of the turbo I can not get a seal no matter what I do,
I got 2 copper washers from pug and these apparently goes both sides of the banjo as in one at the top and one at the bottom,

Anyone else had this issue or know how I can fix this

Colin
 

·
Registered
Joined
·
149 Posts
These oil feed pipes are "free floating". The pipe fits into the banjos with "o" ring seals. When tightening the bolts the banjos have to be central to the pipe. If not then oil will leak past the seals. Hold the banjo central using something like a drill bit or similar ( sorry, can't remember the size ), then tighten the bolt.
Hope this is of some help with your problem.
 
1 - 4 of 4 Posts
Top