Peugeot Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
862 Posts
Take out the plug from the temperature sensor and then short out the 2 wires in the plug with a pin or a piece of wire. If the fans kick in when you have bridged them then it is the the temp switch witch has a fault. If they dont then there is either a fault with the wiring or the fan motor is done. Check this with the engine on,but obviously watch yourself on the fan blades and any engine parts that will heat up.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top