Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
682 Posts
Just had mine replaced too at a cost of £700. My DMF was on the way out for 20K miles with a judder when starting off in 1st that gradually got worse till it went bang. Then the clutch pedal dropped, there was a burning smell and a loud squeaking noise like a losse fan belt when the clutch was depressed.
 

·
Registered
Joined
·
4,506 Posts
sabasteeno, that was the exact same symptoms i had when my release bearing went on my 307...lucky it was a petrol and was a solid flywheel...been told that if it was DMF the power of the bearing going and the clutch smashing into the flywheel would of done the DMF in.
 

·
Registered
Joined
·
682 Posts
sabasteeno, that was the exact same symptoms i had when my release bearing went on my 307...lucky it was a petrol and was a solid flywheel...been told that if it was DMF the power of the bearing going and the clutch smashing into the flywheel would of done the DMF in.
Yeah my release bearing gave up and took the rest with it
 
1 - 7 of 7 Posts
Top