My shutter came off it's tracks sometime ago and between myself and a mate we managed to get it back on the track by levering it back in with a screwdriver as one of us ran if forward with the switch. I know it was a bit of a botch it and leggit operation but I figured I had nothing to lose ,anyway it worked and it's been fine since. I have a set of instructions I think which I can scan and email to you or somebody here to put up on the siten as I don't know how to do it, for eveyone to use but to be honest it's looks a nightmare to do.
well i would not use a screwdriver because you can break the plastic slips teeth, also i dont think is glue maybe a two side tape can be replace, there is instroctions online on the servicebox if i had me install i could send you but is not working ?:bashpc: but here is some diagram that can give you someidea you need to start at the back end.
I open my and still cold not fix i got new sliders and alined them all but every time o try opening when they get to the back they pop off the rail and never get back to the from so now i just not using the roof :nono:
here are the images if you want it in english i can get it also your you can go to the service box and open a free acount.