Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hi all, ive recently bought a peugeot 807 zennith 2.2 exec, just had the turbo replaced and mass air flow etc and dpf fixed... gone to look at the stereo today as considering changing it...

pulled stereo out about an inch then felt resistance, so put it back and decided to leave it, when i push the stereo back in the display is now stuck on peugeot logo says starting then says ready and stops. Ive tried disconnecting battery then re-connecting after 10 minutes but still the same.

ANy ideas how I can fix this?

Also ive tried to do the sat nav update several times , its an RT3, but still says no disc and cant read. any help appreciated, if any one could send me the update and sat nav discs that work, as Im not sure im burning them right, i'd happliy pay for the discs and postage.

may thanks
 

·
Registered
Joined
·
1,054 Posts
Think you need to reach the back of the unit to push all the connecting plugs back in. Probably means you have to bite the bullet and pull it all the way out unless you can get your hand up behind.
 
1 - 2 of 2 Posts
Top