Peugeot Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi

I have some challenges with start-stop on my Peugeot 308 SW II 1.6 BlueHDI EAT6, I have changed the battery as start-stop no longer activate.

After the battery is replaced, the engine stops properly when it enters ECO-mode. But when the brake is released and the engine has to start, it just stands and “beeps”, and the light in the dashboard swings / flutters.

What am I into?
 

·
Registered
Joined
·
169 Posts
Hi

I have some challenges with start-stop on my Peugeot 308 SW II 1.6 BlueHDI EAT6, I have changed the battery as start-stop no longer activate.

After the battery is replaced, the engine stops properly when it enters ECO-mode. But when the brake is released and the engine has to start, it just stands and “beeps”, and the light in the dashboard swings / flutters.

What am I into?
What battery have you put on? Is it definitely suitable for start-stop systems? Did you follow the correct BSI shutdown procedure before changing the battery?
 

·
Premium Member
Joined
·
3,015 Posts
OK, so it's not one with the alternator start system I presume?
 
1 - 7 of 7 Posts
Top