Peugeot Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
56 Posts
Discussion Starter · #1 · (Edited)
Hi all,

I went out to the car, stuck the a/c on and fan at number 4 to demist the windscreen that had steamed up inside. I drove off and stalled :nono: but anyway once I restarted the engine the fan would only work on settings 1,2,and 3.

Has anyone any idea of what may have happened? everything else works as normal.

Cheers...

By the way it is an 03 1.4HDi
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #2 ·
Well incase anyone else comes across this problem. It is the heater resistor that needs replaced. A common problem if you look at google.

Getting it fixed under warranty.
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #4 ·
MadV said:
You also have to look at the wiring harness
So I found out today! I left it in to be fixed, and was told it needs a new wiring harness too. So it's all being done tomorrow under warranty. Thank god for a decent dealer :D
 

·
Registered
Joined
·
56 Posts
Discussion Starter · #5 ·
All done and fixed. Took about an hour and a half for the new harness and resistor. Let's hope this is the end of my problems now as the warranty is about to run out :p
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top