Peugeot Forums banner
2661 - 2680 of 2702 Posts

· Registered
Joined
·
25 Posts
Really sorry if this is an obvious question but Im wanting to get my 2014 308 firmware up to date as possible and then the maps and then the speed cameras. Is this the correct order to do it?

Specifically what is the latest firmware version from those listed above please?

Is the latest firmware listed at the beginning of this huge thread or is there another link now?

thank you for your help

Liam
 

· Registered
Joined
·
25 Posts
if you mean the navigation settings - nothing is deleted or overwritten here. Your picture shows me that it is indeed a SMEG+. Don't expect any miracles from this update, the changes are minimal, most people don't even notice the difference.

Mainly the radio stations and map settings or system settings, I assume everything goes back to factory... not a problem just want to make a note of things first
 

· Registered
Joined
·
25 Posts
There are some voices that attest the SMEG+ a better FM reception.
The voice in the navigation routing will no longer lisp after the update.
These are the advantages that I know of. Some also believe that the SMEG+ responds a bit more quickly - wishful thinking?
I have to admit I'm pretty shocked at the poor fm reception compared to previous 207 sw same stations same locations.

Will update as soon I update.. fat32 32gb max and away we go...
 

· Premium Member
Joined
·
3,403 Posts
The SMEG FM reception is the worst I have ever experienced. I upgraded to the latest software, but it's still dreadful.
The only thing the late software did was to stop the system rebooting when listening to any BBC DAB station. They changed their station logos, and the old SMEG couldn't cope with the change, though it was all within the correct perameters.
 

· Registered
Joined
·
4 Posts
Hi everyone,

I recently updated my Peugeot 308 with the latest firmware 5.43.A.R2. It went all good. Then I wanted to update the maps to version 119. Because the maps have grown a lot in size, I had to delete a few regions like Scandinavia and Eastern Europe to free enough memory. Then I did the update, all seems to have gone fine (activation key accepted, message that maps were successfully udpate) but the SMEG+ unit still shows the old map version...

Any idea?
 

· Registered
Joined
·
4 Posts
Hi All, I have created a guide to Updating the Maps and Speed Cameras on the SMEG+ unit installed in the 2014 308's and some of the later 2015 + 208's. As far as I know, the Maps will also work for the older SMEG versions, and that the procedure is just slightly different. I do not have the equipment available to try this, so I cannot guarantee it. Perhaps someone will comment and update us at some point. Disclaimer: This guide is meant for informative purposes only. Any time you play with software on a system that is not meant to be played with, you are risking damaging the system and / or voiding the warranty that came with it. If you choose to follow the instructions in this guide you are doing so at your own risk and you will be responsible if you damage your system. That said, it worked fine for me :thumb: Here you go: Map Update Procedure SMEG+ By the way, if anyone has any feedback or constructive criticism, I may make changes to this file as I see fit. Comment below. * * * I am going to try and keep the files up to date on the first page of this post so you don't have to dig around comments every time something is updated * * * Latest downloads: 2019-2 Maps http://psa.download.navigation.com/automotive/PSA/RT6-SMEGx/42050.ZIP Java Generator for Maps Key: Download SMEG+ Map and Speed Camera Update Procedure Additional link by Paul-R October 2019 Speed Cameras: https://www.mediafire.com/file/4xtsztbvj16obwc/Speedcams_EU_All_PSA_Units_(2019.10).7z/file Firmware SMEG_5.4.B.R6: FIRMWARE UPDATES - INSTALL AT YOUR OWN RISK Password: lambda14 Firmware SMEG_5.4.B.R8: FIRMWARE UPDATES - INSTALL AT YOUR OWN RISK Password: lambda14 Firmware SMEG_5.41.B.R4: FIRMWARE UPDATES - INSTALL AT YOUR OWN RISK Pass: psa (Currently not working) Firmware SMEG_5.42.B.R4: FIRMWARE UPDATES - INSTALL AT YOUR OWN RISK (Mirror source kindly hosted by a forum member) SMEG_5.43.A.R2: FIRMWARE UPDATES - INSTALL AT YOUR OWN RISK IF YOU HAVE PROBLEMS If you get a protection error. Turn the car off, get out and lock it. Wait for the unit to go to 'sleep' (about 5 minutes). Then try again. If you get any other error, or nothing shows at all, screenshot the contents of your USB stick and post them here. If you message me, I will only say the same thing! If anyone feels the need to donate a small thank you to my PayPal for helping out and keeping this guide and links up to date, you can do so here: PayPal For reference if you want to know how old your maps are, you can use the following in your Map Version to determine: Gr_409 = 2015-1 Gr_410 = 2015-2 Gr_411 = 2016-1 Gr_412 = 2016-2 Gr_413 = 2017-1
Hi there, I just bought my first ever Peugoet, my 2015 Peugeot 308 GT -Line has SMEG5.2.A.R9, is there a new one after that? if so, does anyone have a link for me to download the update from. Thanks for the group, it helps a lot of us
 

· Registered
Joined
·
25 Posts
Hi there, I just bought my first ever Peugoet, my 2015 Peugeot 308 GT -Line has SMEG5.2.A.R9, is there a new one after that? if so, does anyone have a link for me to download the update from. Thanks for the group, it helps a lot of us
Computer Gadget Personal computer Font Display device


That's the latest firmware, I did mine 2 days ago. Its September 2017. If you press and hold the cog settings icon compare to my image. I've yet to get around to the maps or cameras
 

· Registered
Joined
·
4 Posts
View attachment 102467 That's the latest firmware, I did mine 2 days ago. Its September 2017. If you press and hold the cog settings icon compare to my image. I've yet to get around to the maps or cameras
Thanks a million, I installed the 26482 version last night, is that now an older version?, sorry for the question as I just bought my first Peugeot a week ago.
 

· Registered
Joined
·
25 Posts
Can i use this one on peugot 508 2014?

Hi,

is this now the latest mapping available for the 308 please?
Also when I click the link it says access is denied, is there a way of obtaining it please?


edit it seems to download if I remove the https. but gets towards the end and says failed, after several attempts it has successfully downloaded
 
2661 - 2680 of 2702 Posts
Top