Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
80 Posts
Discussion Starter #1
Hi,
I have a small leak from the vacuum pipe connector to the vacuum pump.

I will obviously have to replace the connector because the oil will rot the rubber o rings.
Anybody happen to know the part number of the connector, and does the pump have an internal oil seal to stop engine oil getting into the pump?
 

·
Registered
Joined
·
315 Posts
the pump's full of oil, it's got a feed and a return.

I'll guess the connector isn't available on it's own, you'd need the whole pipe.

If that's not an option, consider a turn of tape on the spigot to fatten it up a touch, pulling the O-ring out of the connector and finding a replacement (at an engineering suppliers, possibly), or botching it by just slabbering some silicone over the connection.
 
1 - 2 of 2 Posts
Top