Peugeot Forums banner

screen fade cheap fix??

20K views 27 replies 8 participants last post by  trustme 
#1 ·
hi does anyone know how to do a self repair on my heater etc display as its suffering from heat fade thanks
 
#5 ·
if its one of the early ones with the white back,nobody has managed to fix one yet.
 
#7 ·
yep it'll have the earlier screen in,good luck on fixing it nobody else has managed and if you do you could make a fortune :thumb:
 
#16 ·
yea the wiring is the same but the plug is on the other side IIRC, also the early ones have a white plastic back and the newer ones have black
 
#18 ·
#28 ·
it is to do with the power to the leds not the ribbon, there is some surface mount voltage regulators on the pcb and its them that are failing either that or the leds are fauling and drawing too much current, try swap the leds on the pcb and see if that fixed the problem
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top