Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
214 Posts
Discussion Starter #1
Hi guys . I think Ive got a Bearing on its way out on the rear of my 407 I can hear a whine and rumbling noise allbeit faint at the moment but my ear has picked up something. Has anyone got a how to guide on changing a bearing? Or has anyone any advice on replacing one?
 

·
Registered
Joined
·
214 Posts
Discussion Starter #2
Just checked another Peugeot Forum site and theres quite a bit of info regarding the change of the rear bearings just need to know what Torque setting. I have just heard it has to be torqued to 250Nm. Thats tight
You need to remove the Caliper / Disc n Pads then undo the hub nut (40mm) using a bearing / hub puller pull the hub off and no doubt the inner race of the bearing will be on the stub axle either heat or chisel the inner race off and reassemble. Just need to pinpoint which side it is.
 
1 - 2 of 2 Posts
Top