Peugeot Forums banner

1 - 12 of 12 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
My car is 406 D9 2.0L 16v. It had rough idle,stalling,jerking and surging of idle. So far I replace the TPS,Stepper motor and the coolant temperature sensor. So car is more smooth and no jerking. But idle is fluctuating slightly and car stalls when try to take off and when reversing. Also car sometimes need to crank bit more to start. What might me causing this? I cannot detect any vacuum leaks also. Thanks in advance
 

·
Registered
Joined
·
115 Posts
Diagnostic tool

I have checked and the seller confirms that the USB ELM327 Auto Diagnostics tool will work on the Peugeot 406 (petrol) 2001 model and later.
 

·
Registered
Joined
·
115 Posts
ELM327 Works with 2001 406

I have checked and the seller confirms that the USB ELM327 Auto Diagnostics tool will work on the Peugeot 406 (petrol) 2001 model and later.
I have tested the USB ELM327 on my 2001 406 Petrol 2.0 and it works with PCMSCAN Software (Palmer Performance Engineering, Inc.)
 
1 - 12 of 12 Posts
Top