[hogwarzt]

Hi everyone,

Is there a diagram available showing the area the ECUs are located and possibly how the looms are routed. I’m particularly interested in the Rood ECU.

Regards
Rich

 

[reliable406]

Roof ECU is mounted beside the pump in the boot behind the spare wheel and rarely gives any trouble unless water gets in.

 

[hogwarzt]

Thanks for the reply. Just wanteed to know what the connections are to the ecu from the other sensors.. Do you know if the Haynes manual has this detail?
regards
Rich

 

[beelim]

Here it is .
Just ask what questions you want from this diagram and I can find it for you.

 

[beelim]

Here are more . The haynes manual has nothing for the 307cc. The best info is from these guys.
http://www.emanualonline.com/Cars/Peugeot/Peugeot-307-Workshop-Repair-And-Service-Manual.html

 

[hogwarzt]

thanks for the replies!

 

[hogwarzt]

Just a quick update: 'Roof Not Complete Message' has now been fixed!!!
There are 2 wires that run from the 2 roof locked micro switches (wired in series), they run down the roof on the driver’s side. The RED had become open circuit at the intersection with the boot/roof hinge.

Rather than fixing the cable I fitted a couple of new ones instead.
Regards
Rich