Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
130 Posts
Discussion Starter #1
about to buy a replacement drivers seat for my 307.

how hard is it to do a direct "like for like" swap ?

what do i needc to unplug under the seat and is there any chance of an airbag issue as the seat has airbags.



thanks


pete
 

·
Registered
Joined
·
15,377 Posts
If you can change a wheel you should be able to change the seat it is a little more involved but nothing too complicated seat will most likely be held down by torx bits and the airbag plugs can be a bit difficult to release if you have not done them before just be carefull not to break the plugs or you will need to solder the wires together

Air bags do not blow up for no reason contrary to popular belief they are triggered by a power source unplugging them will not pop them

I did see a seat bag blown once by some ejit using a multimeter to test the pins :)

Doubt he will try that again
 

·
Registered
Joined
·
130 Posts
Discussion Starter #3
thanks that was dead helpful.

the airbag thing was worrying me alot - dont i have to disconnect the battery or anything ?

cheers
 

·
Registered
Joined
·
873 Posts
Its very easy, you dont need to disconnect battery or anything. You need a t40 torx bit to remove the four torx bolts holding the seat down....
 
1 - 4 of 4 Posts
Top