Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
24 Posts
Discussion Starter #1
Hi all I brought a van a few weeks ago and was wondering how to remove the cambelt cover at the top? On my old berlingo with 1.9D I had to take off the mount as cover was in 2 pieces. This one is in 3 pieces and looks like I can get away with not taking the mount off. I had a quick go today and managed to find 4 bolts but still didn't want to come off. Its a dispatch 2006 1.9D.

I just want to inspect the belt as person I brought it off said they changed belt and water pump and gave me a bag with old bits in. Would just like a look for myself to see if they was lying or not.
 

·
Registered
Joined
·
15,086 Posts
Easiest way is to remove the mount as some bolts are hard to see once mount is off you can see the bolts easier the covers do come out in separate sections front section is easiest but mount does still catch on it so easier just to remove mount.

Once you know where all the bolts are it can be done without removing mount but i still remove it and lift engine as its easier.
 
1 - 4 of 4 Posts
Top