Peugeot Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
15,376 Posts
on a 307 yes as there are bolts you cannot get to you can however just remove the side of the bumper and get enough room to get at the bolts
 

·
Registered
Joined
·
175 Posts
Discussion Starter · #3 ·
Hi Thanks for the reply to this and the 106 question.

The problem with the headlight unit is the RH indicator doesn't work in the unit, the side repeater and rear do, but fast, and there is a electrical pulse at the headlight connector, and when I manually connect a bulb to the connector everything works fine. So im guessing its a connection problem in the headlight unit.

Dave
 

·
Registered
Joined
·
403 Posts
Chuck some patrolium jelly (Vaseline) on to the bulb holder contact points, see if it works

Sent from my FRD-L09 using Tapatalk
 

·
Registered
Joined
·
696 Posts
Could be a bad earth too.
Look for earthing points M003A as in the diagram H for the RH headlamp unit and make sure its clean.


Automotive exterior Automotive design Line art Bumper part Technical drawing



Terry
 
1 - 5 of 5 Posts
Top