Peugeot Forums banner

1 - 3 of 3 Posts

·
Moderator
Joined
·
5,987 Posts
If you are good at soldering you may get away with it but remote locking will not work as transponder is paired to the board
 

·
Registered
Joined
·
4,779 Posts
Is it possible to get a secondhand remote and soldier on my transponder to the board?
if its the flip type key then there is 2 options

1, if there is one chip on the pcb and you get the same style pcb and swap the chip over it will work no programming needed, you may need to resync the remote.

2, if it has 2 chips on pcb the one thats says pcf is the one that starts it and you may have to swap the other chip too but you could just try swapping the pcf chip
 
1 - 3 of 3 Posts
Top