Peugeot Forums banner

1 - 8 of 8 Posts

·
Registered
Joined
·
3,505 Posts
Discussion Starter #1
hi all. when i brought my new car it came with a flip key

it worked at first but now it doesnt work

i have ordered a new outer casing as the part the battery sits in is missing (was missing when i brought it)

trouble is mine seems to have a wire inside and i dont know where it goes. looking at online non have the wire. is it meant to be there or is it connect the battery because the clips missing
 

Attachments

·
Registered
Joined
·
3,505 Posts
Discussion Starter #3
wire is there to replace a missing clip that touches the outside of the battery


Thought so have ordered a new case so will try and get it back to how it should be :)


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
3,505 Posts
Discussion Starter #4
Have managed to get it working by putting the wire behind the battery. When a fob is a few quick seems bonkers they went to all that trouble lol


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
3,505 Posts
Discussion Starter #5
Got a new outer casing like an idiot tried to unsolder the wire from the board now I can't get the central locking to work at all. New battery new case any ideas the 2 pins on the circuit board are both soldered

Anyone repair these



Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
3,505 Posts
Discussion Starter #7



Sent from my iPhone using Tapatalk


I have taken the solder off and got it back to bare motherboard I have tested the connector to the.battery that works

The connector on the board works so there's a connection

Just can't get it to work
Have tried a bsi reset and everything


Sent from my iPhone using Tapatalk
 

·
Registered
Joined
·
3,505 Posts
Discussion Starter #8
after testing the old board. all the connectors worked but could not get the central locking to work

tried bsi reset no luck
tried recoding keys no luck

in the end i brought a complete flip key on ebay for £18. the inside by the battery was loose. some gorilla glue sorted it

went to peugeot and got the code.
cut the spare blade

set it all up on diagbox. all working with a working fob

total cost for a spare key
immo code £17
key £18
cutting £10
total £45

i have the old key now as a spare as i only had 1 key with the car. both work and the car runs with both
 
1 - 8 of 8 Posts
Top