Peugeot Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Want some information on taking the rear drum off 206. Handbrake was stuck on, Managed to free it with a few hits of the drum. unable to get drum off. Are there any bolts holding it on as cannot see them. Was told to get a crow bar and just pull it off. Also i have released hand cable from inside the car. drum now moving very easily. Any information would be great.
Thanks Simon
 

·
Registered
Joined
·
13 Posts
hi Simon ... i got a 51 plate 206 and if as I believe the designs are the same I def would not recomment using a crow bar or anything similar. You might want to try a universal bearing pully. I have to re-new the shoes on the back of mine and the rear wheel bearing is part of the hub assemble and is VERY tight. The bearing is designed to last the life of the car.

I am assuming that you have removed the hub nut in the centre of the hub. You will see it with the wheel off!!

I am sure if yours is any different someone will come along and tell me (us)!

HTH

Paul
 
1 - 2 of 2 Posts
Top