Peugeot Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hi All,

I'm getting confused by Service Box as to what part number I need for the rear disc brakes. The car has alloy wheels and I'm not sure of the axle diameter.

Could somebody advise what part number I need?

Thanks in advance.

Service Box:

TRW LUCAS
A) FITTING OF STUB AXLE DIAM 25
B) FITTING OF STUB AXLE DIAM 30

E169506
02
EM:1 REAR BRAKE DISC PSA
AR
- AND AGE >= 3
SUPPLIED WITHOUT BEARING
link to associated invoicing time

E169510
02
EM:REAR DISC HUB PSA
AR
- AND AGE >= 3
SUPPLIED WITH BEARING SEE A

4249 32
02
WHEEL HUB DISC
DIAM 249 EP 9
SEE B
link to associated invoicing time

E169512
02
EM:REAR DISC HUB PSA
- AND AGE >= 3
SEE B

LVB D13 0 9
02
M:1 FRONT BRAKE DISC PSA
- AND AGE >= 4
 

·
Registered
Joined
·
5,904 Posts
First off you need to check if the discs are part of the hub or seperate and measure the diameter of the discs. If they are seperate there will be some torx screws inbetween the holes for the wheel bolts and you should be able to source the correct discs from a local spares shop with the diameter size.

If they are part of the hub then you should be able to source discs with the diameter measurement but I would suggest getting them WITH bearings and ABS rings.

Places like ECP tend to list the discs as seperate or part of the hub and also by the diameter with and without bearings / ABS Rings. You need to ask for a set with bearings / ABS rings to ensure you get them.
 

·
Registered
Joined
·
648 Posts

·
Moderator
Joined
·
5,886 Posts
If you check the stub axle for your VIN in servicebox it states the diameter in the description
 
1 - 6 of 6 Posts
Top