Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Good day special people please I need hel, my 407 Peugeot automatic, will start well accelerate well and will start moving with power, but when on the move instead of changing to the next gear it will show PRND light and the engine light at same time will start blinking, and the engine will lose power, and start vibrating. When putting the engine off and on again it will pick normal again, to an extent it will off on its own. Please I need help, thanks.
 

·
Registered
Joined
·
27 Posts
Check all of the connectors between gearbox and bsm. I had similar fault too, after wiggling all of the connectors in the gearbox and make sure they were clicked in fully the fault has disappeared.

Also, check your battery condition and all - & + cables, sometimes they seem to give a weird faults.

My PPplanet was giving me an unknown error in gearbox.
 

·
Registered
Joined
·
254 Posts
Check if water or oil didn't land over the connections.
Clean everything with contact cleaner. check your grounds. That sounds like a bad connection.
 
1 - 3 of 3 Posts
Top