Peugeot Forums banner

1 - 4 of 4 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Hi, I have a problem with a power amplifier, or there is any chance that anyone can help me. The steering wheel is very rigid and hard to turn.


Write down Posta

Thanks for the help :)


P.S.-
And maybe somebody might know what kind of oil does the Peugeot 407's 2005 need for power steering
 

·
Registered
Joined
·
823 Posts
Before doing the above... what engine do you have?

Most use Electro Hydraulic powersteering which needs Total DA.

The 2.7 HDi use conventional hydraulic power steering.
 

·
Registered
Joined
·
38 Posts
This is assuming its a fluid problem.
Was looking on here as I have P/S fault to however I think mine is the module on the pump itself. Symptoms are total loss of assistance. Conecting up to a scan tool the module does not communicate with the bcm. All powers n grounds are good and the CAN HI n CAN LOW signals are both present at the wiring harness..Its just dead...Now being easter I cant even get another to after the holiday... :(
 
1 - 4 of 4 Posts
Top