Peugeot Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Hi
got a 02 206 hdi need to program another key for it
Have pug planet and interface and having it speaking to car ok,
Looking for a bit of walkthrough for key progamming before I jump in with big boots on as usual.
Like I canny fck up my only other orignal key could I

Thanks
mask0017
 

·
Registered
Joined
·
1 Posts
Hi
got a 02 206 hdi need to program another key for it
Have pug planet and interface and having it speaking to car ok,
Looking for a bit of walkthrough for key progamming before I jump in with big boots on as usual.
Like I canny fck up my only other orignal key could I

Thanks
mask0017
key generator
 
C

·
Guest
Joined
·
0 Posts
Program of keys is easy you'd be a complete numpty to get it wrong, kids can do it:nod:

Make sure you have code, all keys to be coded and do as planet tells you:thumb:
 

·
Registered
Joined
·
14 Posts
Discussion Starter #6
Thanks
will have a go over the weekend sometime
Thought I seen a bit in planet that said transponder keys somit like that.
Take it I go there and follow the instrustions on screen.

mask0017
 

·
Registered
Joined
·
9,733 Posts
the page before Ecu Global scan, there should be a part that says replacement parts , check in there for recoding keys , have you the security code?
 

·
Registered
Joined
·
14 Posts
Discussion Starter #8
ye got the code, got info from you a while back that £5 info stuff
has transponder code (that be security code) and mechanical code got a key cut fron that number and it opens doors and turns over engine, but still need to code it has a virgin chip in it

thanks
mask0017
 

·
Registered
Joined
·
14 Posts
Discussion Starter #10
Yip easy enough got it done
Only bother I had was need to put the virgin key as key 1 then it worked.
Craped it first time when it gave error reading orignal key.
But all sorted both keys working. starting and remote locking and unlocking..

Thanks for the help boys

mask0017
 

·
Registered
Joined
·
15 Posts
Peugeot planet key programming access code

Hi, I'm trying to program a key for my 307 using Peugeot planet in the replacement parts section.

Can someone clarify if the Planet access code is meant to be the same as the transponder code?

The only code I have is the transponder code but access is denied when I try to use it.
 

·
Registered
Joined
·
9,733 Posts
Hi, I'm trying to program a key for my 307 using Peugeot planet in the replacement parts section.

Can someone clarify if the Planet access code is meant to be the same as the transponder code?

The only code I have is the transponder code but access is denied when I try to use it.
When coding a key , replacement parts , new key , transponder key , enter transponder code twice then follow instructions ,
no other code is needed ,
go into your BSI and make sure the vin number is same as whats on your car,
make sure your battery is reading over 12.5volts,
make sure your fob is brand new.
 

·
Registered
Joined
·
291 Posts
Hi All

I know this is an old thread but am after a little info regarding keys.

I have the chance of a peugeot that has no keys with is, can a new key be programmed without an original key?

If not, what would need to be done to get new keys to work?

Regards
 

·
Registered
Joined
·
15 Posts
Peugeot No Key

To use PP2000 to program a new key, you need a key that can at least turn the ignition on.
Using the vin number you can acquire the Peugeot key cutting code for a fee, search net for Peugeot codes.
Auto locksmiths use that code to cut you a new key.
To program transponder in key using PP2000, refer to other posts on this thread.
Good luck with it!
 
1 - 16 of 16 Posts
Top