Peugeot Forums banner

1 - 10 of 10 Posts

·
Registered
Joined
·
9 Posts
Where would i have to look for the engine number stamped on the engine.
cant see anything around by the dip stick or behind the exhaust.
need to replace the engine but dont know the code.(not out of the van yet.)
seen engines for sale with dv6ted ??
would it be on the log book and what part of the long number do you use.
cheers.

Moved to the correct thread hopefully you will get a better response here
 

·
Moderator
Joined
·
3,017 Posts
Product type utility vehicle
commercial marque/component type peugeot
vehicle family partner utility vehicle (b9)
silhouette van
trim level medium low plus
engine turbo diesel dv6buted4
transmission bvm5

any help?
 

·
Registered
Joined
·
9 Posts
Discussion Starter #5
Thanks. would an engine with code DV6DTED9HP be the same or even fit???
as i dont know what brake horsepower or anything yet.
dont want to buy the engine until i know what code it is.
thanks
 

·
Registered
Joined
·
15,377 Posts
Look at your vin digits 5-8 are the engine code there are many versions of DV6 engines some interchange some dont it will be 9HU 9HZ or similar search using this 3 digit code

The DV6DTED is different to yours
 

·
Registered
Joined
·
9 Posts
Discussion Starter #7
Thanks for the replies. ?
Engine code: DV6ATED4 (9HX) will this exchange for the 9HT ?? its the only one in my local scrap yard.
if not will look on ebay.
cheers
 

·
Registered
Joined
·
15,377 Posts
As long as they are both 16 valve you should be able to fit it but it wont fit straight in you will need to check turbos injectors flywheel etc there are so many variants of these engines but the core engine is the same.
 

·
Registered
Joined
·
9 Posts
Discussion Starter #10
Hi guys fitted another 9ht coded engine in the partner and it started first time. but now it wont start. no fuel at all.??
got the code P0193 fuel rail......etc
Would this stop the fuel and the electrics to the injectors as i cant get any reading on the meter when cranking over. and no fuel to the injector pipe when cracked open as if to bleed?
cheers
 
1 - 10 of 10 Posts
Top