Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
Hy guys.So i took my car to the garage back because of the p0341 fault code.
The main mechanic told me that the timing was out for 2mm,they adjusted the timing nőt 100% correct.
I am wondering,could so little diiference make a so annoying problem?
I am driving the car now for 2 days without fault code.
 

·
Moderator
Joined
·
7,587 Posts
Yes it most definitely can they need to be spot on 2mm is around 1/2 a tooth on the belt so quite a big discrepancy in reality, that's why they have the floating crank pulley to allow for minor differences between belts
 
  • Like
Reactions: St4rxx

·
Registered
Joined
·
7 Posts
Discussion Starter #3
:)
Yes it most definitely can they need to be spot on 2mm is around 1/2 a tooth on the belt so quite a big discrepancy in reality, that's why they have the floating crank pulley to allow for minor differences between belts
Thank you for your replies.
Have a nice evening.:)
 
1 - 3 of 3 Posts
Top