Peugeot Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter #1
Afternoon All

Hoping someone can help me change the bloody headlight bulbs on my 407. The booklet is somewhat vague on how to even get into the casing so hopefully you will be able to help me out.

Thankyou in advance :confused:
 

·
Registered
Joined
·
16 Posts
407 bulb change

Hi, noticed you've not had any replies on the 407 the dipped beam is behind a round rubber cover and there are two electrical connectors gently pull these off and you will notice two metal prongs holding the bulb in place under tension pull these to either side of the bulb and the bulb will come out easily enough BE CAREFUL NOT TO LIFT THE METAL PRONGS STRAIGHT UP AS THE TENSION WILL BE LOST AND THE BULB WILL NOT BE SECURED AS I FOUND OUT TO EXPENSE!!!! when you remove the bulb make a note of the direction it comes out as they will fit ina certain way be patient take your time and it's easy enough sidelight bulbs are trickier as access is tight between engine and front bulkhead. Good luck.:thumb:
 
1 - 2 of 2 Posts
Top