Peugeot Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
50 Posts
Discussion Starter #1
Hi guys is it possible to again access to the manifold exhaust gasket just by removing the egr and unbolting the 3 bolts what hold the turbo on then remove the 8 bolts I believe it is from the top of the engine. If I also unbolt the bottom engine mount and top engine mount so I can move the engine forward thanks in advance regards jay
 

·
Registered
Joined
·
15,377 Posts
No you will need to remove the cat the turbo wont move unless the cat is off first you can remove the manifold and turbo together but i have only ever done this when out the car i would not even attempt it in the car !

Pulling the engine forward as much as you can will make life easier.
 

·
Registered
Joined
·
50 Posts
Discussion Starter #3
No you will need to remove the cat the turbo wont move unless the cat is off first you can remove the manifold and turbo together but i have only ever done this when out the car i would not even attempt it in the car !

Pulling the engine forward as much as you can will make life easier.
Cheers I will have a go at it over the weekend and report back best regards jay
 
1 - 3 of 3 Posts
Top