Peugeot Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
96 Posts
Discussion Starter #1
Does anyone possibly have a guide as to how to remove the oil sump off a Peugeot 308 1.6 VTi, cant find anything on you tube for a 308 at all, and im not sure if things like the exhaust are going to need to be dropped at all, ive had a look under the car and I can access all the bolts without removing anything else, approx 20 x 10mm bolts, but there does seem to maybe be a shielded part of the exhaust in the way of actually removing the sump fully, however, this does seem to be the flat part of the sump, so I may be able to work it around it.

It appears I have an oil leak coming from the sump, I will need to replace the silicone gasket on it, im praying its not the crack shaft seal, but im going to get the car jet washed off underneath on Monday by a local DAF dealer who does it for £5, then drive it about for a while, by this time I should know exactly where its coming from.
 
1 - 1 of 1 Posts
Top